September 15, 2013 — 2344

America’s Cup Racing

Went down to the waterfront to watch some of the America’s Cup races. Incredible boats! The wind was 22 knots, and the top speed they recorded was 47 knots for the NZ boat, 44 for team USA. Shows you what hydrofoils and a 130-foot carbon fiber wingsail can do for you.


Team USA hydrofoiling

Team USA hydrofoiling

The NZ boat heeled way over taking this tack (gybe? I’m not a sailor) and nearly capsized. On the radio you could hear the crew yelling to kill the hydraulic pressure on the sail so the boat would stop lifting.

team NZ nearly capsizes

Shot these handheld with the Tele-Takumar 400/5.6 at about f/8-11, 1/1000s. The lens is really wonderfully sharp, so I think the slight haze you see is actually atmospheric, not optical. In the shot of the boat on its side, they’re something like 3-4km away.

boats turning, golden gate in the background

April 15, 2012 — 1817

Paint schemes

I’ve been doodling some potential paint schemes in Photoshop.

Doesn’t quite show what the finished bike would look like, given all the rust and corrosion and dirt that’s now gone, but close enough. The sketchy taillight is more or less what the new one I got looks like; it’ll replace the original, which broke when I backed it into the garage wall. Well, it was chunky and square anyway.


March 23, 2012 — 2036

Melting paint

Took a bit of time to strip the damaged paint off the gas tank today. Dichloromethane is to lacquer paint as Alien blood is to the deck plating of a spaceship:

I kind of like the bare steel underneath, so I think that rather than painting it, I might just polish it up and wax or clearcoat it. Maybe bare metal with a few colored accents here and there, like 1960s supersonic interceptors? Could be pretty cool.

March 21, 2012 — 2059

It’s alive!

Thirty years of sitting untouched in a barn, one month of cleaning and refurbishment…and it starts up on the first kick. How’s that for Honda reliability?


March 20, 2012 — 2320

Engine work

Dad got a new camera, a Bronica ETR medium-format. Really nice lenses, and very cool how it separates into a bunch of different parts. Here’s me working on the bike:

March 18, 2012 — 2342


Another beautiful spring day, more work on the motorcycle. Since I’m still waiting for those stainless steel bolts to arrive (argh), I figured I’d do some miscellaneous cleaning and work on the electricals. Mostly just tweaking things and getting them working properly.

I fixed the headlight wiring; easy, just some disconnected connectors but what a rat’s nest it was inside there

(see the cute little driving lights?)


March 13, 2012 — 1047

De-rusted gas tank

Decided that 5 days of electrolysis was probably enough for the gas tank. After all, I wasn’t trying to strip any really serious thick rust…just clean up the surface and brighten the metal in general. Well, it worked!




March 11, 2012 — 1918

Alternator and sprocket cases

Today was a wonderfully warm day, so I was actually able to work on the whole bike instead of just little pieces taken inside. Got the oil drained first thing — good, it’s still liquid. I believe this is actually the original oil from 1980, because the guy I bought the bike from didn’t say anything about changing the oil and there weren’t any fresh marks on the drain bolt. Next, I started taking the side covers off to get as much of the old oil out as possible, and to clean the oil filter. Do NOT try to do this without an impact driver…even with plenty of liquid wrench, the screws were well and truly jammed in there, and the JIS heads strip at the slightest provocation. Luckily, a few good whacks from the impact driver loosened them all up.


March 07, 2012 — 0132

Electrolytic rust removal

So, the inside of the motorcycle’s gas tank is fairly rusty. Not so much that it’s falling apart, but there’s enough surface rust and gunk that I’d be concerned about particles floating into the fuel system and clogging something up. Clearly I must clean the inside…except this is a sealed metal bubble with no hole in it bigger than 5cm, and the inside shape is surprisingly complicated (the better to fit around the electrical parts that sit just below it on the frame). How can I reach all those corners to remove the rust?

Electrically! By filling the gas tank with an electrolyte, floating an anode in the liquid, and using the tank itself as an cathode, we can electrically convert the rust back into elemental iron, which is only loosely bound to the underlying metal and can be scraped off very easily. You can’t repair┬árust damage this way, but the process will only attack oxidized iron, so at the end you’ll be left with a relatively clean piece of bare steel showing pitting or roughness where the rust was.

First, sand off some of the paint on part of the tank, exposing the bare metal. This is where you’ll make the cathodic connection.